Name: 10.2cm x 17.8cm
Fairy: 10.5cm x 14cm
Available in 14 colours!
See preview pic.
All orders are shipped out within 24 hours
1: When you receive your sticker, it will be sandwiched between a backing sheet and application tape. DO NOT remove any of the layers yet.
2: Position your sticker in place using the masking tape, leaving one end free.
3: Peel back the application tape gently, making sure the sticker is stuck on it. Discard the backing sheet.
4: Hold the sticker at the free end and pull tightly close to the surface but don’t let it touch the surface yet.
5: With the squeegee in the other hand, start applying some pressure on the sticker towards the inside, in an up-and-down movement until you reach the end. Remember to keep an eye on the alignment of your sticker.
6: Run the squeegee along your sticker a few time with more pressure to achieve strong adhesion.
7: Peel back the application tape gently, making sure not to peel the sticker off it.
8: If any air bubbles appear, you can pierce the edge with a needle and force the air out with your finger.
A print-out of these instructions are included with your order!